Skip to main content

Cape Mario - Case


Cape Mario - Case, originally uploaded by dash16.

So, I've been experimenting with creating a display case for my PixelBlocks creations. Ideally, the case will have two purposes: One, to protect the piece while it ships through the mail, and Two, to serve as a frame for displaying it. It has to be clear plastic, to let light through, yet firm enough to stand up on its own. I like how this turned out, and best of all it was cheap. The screws and bolts and washers were $2, and the plastic sheets were $2.50. I think I'm going to drill more holes, for a total of 8 all the way around so it is really well contained. As it stands, the plastic bows out a bit because the corners are tightened down, and I think if I put 4 more holes in the middle, between each corner it should really hold it in place. It's either that or some beads of hot glue in the corners of the piece. We'll see, I'm going to take it home with me and play around with it some more. I know for starters I'm going to need shorter bolts, as it stands there's at least half an inch protruding from the back.

I'm one step closer to having a piece I can ship through the mail, get your credit cards ready!

Labels:

Comments

  1. Dustin NewellOctober 27, 2009 at 10:34 PM

    I put a couple of beads of hot glue on the back to give it some more traction, will try another drop test tomorrow. Might end up having to drill more holes too, we'll see.

    ReplyDelete

Post a Comment

Popular posts from this blog

How it's done

Been really busy at work lately so haven't had much time to work on my PixelBlocks art.  I figured I'd give an update on the process I go through to make these creations.  Its sort of something I figured out on my own, and have been refining the process to make it easier and quicker for me to do. 1) I find a digital copy of the character I want to do online somewhere. There are quite a few websites that post "ripped sprites" from video games, so there's a lot to choose from.  Couple of the sites I find them from are  Game Sprite Archive  and  NES SNES Sprites . 2) Once I have the sprite, I convert it to a custom color palette in Photoshop.  There are only 20 different PixelBlocks colors (and I own 18 of them), so this can be quite a challege. Some colors don't have an equivalent PixelBlock color, so I have to either fake it or skip doing that character entirely. Magus from Chronotrigger unfortunately was skipped for this reason; I didn't have a good pur
9 comments
Read more

Contact info

I was going through my blog settings and noticed I had setup the contact email to go to an address I don't check often, my MobileMe account @mac.com. Some of the messages sent to it were forwarded to my primary email account @gmail.com, but after reviewing my junk mail folders for my MobileMe account I see that some messages that have been sent to me over the past couple years went unanswered. For that I apologize; I typically respond to emails sent to me as some of my followers may know. If you've reached out to me in the past and found my lack of answer displeasing, by all means don't hesitate to try and contact me again. I've fixed the glitch.
Post a Comment
Read more

RROD

RROD , originally uploaded by dash16 . RROD FTL.
5 comments
Read more